Hop til indhold
  • 0

Binding between item and thing stops working after reboot


kerm
 Share

Spørgsmål

Hi

i installed openhab 2 on pi2 and as soon as i reboot the pi then all my items stop working, then i can remove the link between things and item. rebind them and it will work until i reboot

https://openhab.jfrog.io/openhab/libs-pullrequest-local/org/openhab/binding/org.openhab.binding.ihc/2.4.0-SNAPSHOT/ 

i used this guid to install.

https://knab183.wordpress.com/2018/11/03/installing-and-using-ihc-bindings-on-openhab2/

Link til kommentar
Del på andre sites

6 svar på dette spørgsmål

Recommended Posts

  • 0

Hi

I have just now flashed the PI with this image

openhabian-pi-raspbian-201908050414-gitca0976f-crc6a66b5a1.img

then I putty into it and use the guide

https://knab183.wordpress.com/2018/11/03/installing-and-using-ihc-bindings-on-openhab2/

I then added 2 dimmers to an item and a temp sensor to another item,

image.png.d7fdafcb6a9fb43f32a7334db8b62aec.png

then Sudo Reboot

After the reboot I get this

image.png.13caf7378185ed75d61c5fe0b7587e24.png

 

PS by the way it was not happy with æøå only the first time I loaded from ICH after it restarted if could not understand æøå I therefor renamed all my items in ICH controller

events.log

openhab.log

Link til kommentar
Del på andre sites

  • 0

@kerm, communication between openHAB and IHC controller doesn't work very well. Most of the communication ends up to timeout, which means that IHC controller didn't send response to IHC binding. You could try to increase the timeout which is by default 5000ms, but not sure if that will solve your problem. What are your IHC controller HW and SW versions?

You are using rather old version of the binding (around 1 year old), so I recommend to use newer one.

Link til kommentar
Del på andre sites

  • 0
På 15.10.2019 at 17:41 , kerm skrev:

Hi

i installed openhab 2 on pi2 and as soon as i reboot the pi then all my items stop working, then i can remove the link between things and item. rebind them and it will work until i reboot

https://openhab.jfrog.io/openhab/libs-pullrequest-local/org/openhab/binding/org.openhab.binding.ihc/2.4.0-SNAPSHOT/ 

i used this guid to install.

https://knab183.wordpress.com/2018/11/03/installing-and-using-ihc-bindings-on-openhab2/

Nogen som har et link til hvordan man sætter Openhabian op mod IHC? Har fået Openhabian på en Pi3B og har installeret bindingen til IHC / Elko. Troede så at der ville poppe en "thing" op i min inbox så jeg kunne konfigurere login credentials. Men det gjorde der så ikke...

Linket ovenfor "knab183...." virker ikke, men går til noget rekvalmehalløjsa.

Link til kommentar
Del på andre sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Gæst
Svar på dette spørgsmål

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loader...
 Share

×
×
  • Tilføj...

Important Information

Privatlivspolitik og We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

1200x630bb.png

ok